Tes-5685M+Tes-5685Bx - Taiden TES-5604 Series Installation And Operating Manual

2.5.5 TES-5685M+TES-5685BX

1. Speaker volume
TES-5685M integrates 4 speakers (A/B/C/D) which
divide into 2 groups, A+B and C+D. Adjust every groups
of speakers via the "VOL." knob on the TES-5685M,
range: mute, -30 to 0 dB.
2. Treble/bass
Adjust the treble/bass of line out and speakers via the
"Treble"/"Bass" knobs on the TES-5685M.
Note:
 The bass/treble is usually adjusted only during
the initial installation.
3. External microphone in and volume
A USB interface can connect to the external microphone
(TES-5604CSM(L)) and adjust the volume via MIC.(USB)
knob, range -30 to 0 dB.
4. Function switcher
Setting the function parameters (switch up is 1, switch
down is 0)
Function
F1: IR TES-5685MA/MB
frequency TES-5685MC
F2: Auto dodge
AFC
AUTO FADE
Note:
 The function parameters are usually adjusted
only during the initial installation.
5. PPT-page slides (only for TES-5685MB/MC)
TES-5685MB/MC connects to PC via the USB
interface, cooperates with the TES-560x series
microphone to realize remote PPT-page slides. See
5.4.
6. Fader rate (only for TES-5685MA)
When the auto dodge is off, adjust the fader rate
between IR microphone and array microphone via the
FADER knob on the TES-5685MA: reduce the array
microphone (sound of students) until mute it with
clockwise rotation and reduce the IR microphone (sound
of teacher) until mute with anticlockwise rotation.
7. Public address audio input
TES-5685BXP has a PA IN interface for public address
audio input. When enable the PA IN, the audio of PA IN
puts out to all outputs and all other inputs are muted. PA
IN volume knob can adjust the volume of PA IN.
8. Web server (only for TES-5685MA)
TES-5685M connects to PC via LAN interface, input the
IP address of device (see the IP address via "Taiden
Device Discovery" software) into web browser to search
the version and parameters:
1 0
1.67/2.33 2.33/3.0
2.33 1.67
On Off

On Off

On Off


31
(only for TES-5685M+TES-5685BXP )
Device Version: the version of TES-5685MA;
Array Mic Parameter:

Mic Sensitivity: range: -30~0 dB；

Noise Suppression Level: adjust the noise
reduce level (0 to 3) of the array microphone,
the smaller the value, the more the noise but
the farer the working distance, vice versa.
Auto Dodge (effective when the F2 switcher on the
TES-5685M is on):

Sensitivity: adjust the trigger sensitivity of IR
microphone, range: -60 to -30 dB, the array
microphone will be mute after triggering.

Recovery Time: setting the recovery time
range (0 to 3 seconds) of the array microphone
and the sound will be recovered gradually in
the set time.
Network Setting:

Setting the IP address, netmask and gateway,
reboot the device after setting. Click the DHCP