Ceiling Mounted 2 - Taiden TES-5604 Series Installation And Operating Manual

2.3.2 Ceiling mounted 2

Mounting steps:
Step 1: Position the mounting bracket on the ceiling according to the installation location of the TES-568xM and mark the
positions of the drilling holes. Drill two holes (5 mm diameter, 30 mm depth) into the ceiling.
Step 2: Put the included rubber plugs into the mounting holes on the ceiling;
Step 3: Fix the mounting bracket on the ceiling with M3 screws;
Step 4: Put the slots of TES-568xM into hard ceiling mounting bracket and fix it with clockwise rotation.
WARNING:
 This installation method is applicable when the ceiling thickness is greater than the length of the rubber plug.
Figure 2.7 Ceiling mounted 2
14