Ceiling Mounted For Tes-5685M - Taiden TES-5604 Series Installation And Operating Manual

2.3.4 Ceiling mounted for TES-5685M

Figure 2.9 Ceiling mounted
Mounting steps:
Step 1: Position the mounting bracket on the ceiling according to the installation location of the TES-568xM and fix the
mounting bracket on the diagonal with two M6 wedge concrete anchors;
Step 2: Align the slot on the top of TES-5685M to the snap-fit joint and push TES-5685M in the direction of the arrow until
the tapped spacer and the mounting hole are aligned;
Step 3: Insert the M4×30 mm screw into the tapped spacer to fix TES-5685M;
Step 4: Run the Safety rope through the Lock hole on TES-5685M and tie the safety rope.
16