Table of Contents
Advertisement
Bluetooth
Remote voice control
Activate remote voice control
1. Press VOICE on the handset or telephone base.
If you have connected two cell phones to the telephone,
the telephone shows Select a device:. Press
to highlight the desired device, then press
If the activation fails, the telephone displays Not
available.
2. When the telephone base or handset plays the
phone's voice app, start speaking toward the
telephone base or handset, and then wait
for feedback. Make reply to the voice app's
feedback, if necessary.
You can press /SPEAKER on the handset
the feedback through the handset earpiece.
3. To end the current remote voice control session, press CANCEL on the telephone
base or handset. You can restart by following Steps 1-2 mentioned above.
Notes:
Once you have activated the remote voice control feature, you are using your cell phone's voice app to operate your
cell phone.
any limitations of the voice app.
Due to the settings of certain cell phones and voice apps, your cell phone may not support the remote voice control
encounter any problems.
the
If you need to press dialing keys (0 9, TONE , QUIET#) during a cell call, please make the call using the cell lines
of your telephone system instead of using the voice app via the remote voice control feature (see Make, answer
or end a cell call on page ).
CID
/SELECT.
MENU
28
or
DIR
Advertisement
Table of Contents
