Arp Table - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

Configuring with Web Based Management
4.4 "Information" menu
● Location tag
Shows the location tag of the device. The location identifier (LID) is created during
configuration of the device with HW Config of STEP 7.
● Date
Shows the date created during configuration of the device with HW Config of STEP 7.
● Descriptor
Shows the description created during configuration of the device with HW Config of STEP 7.
4.4.4

ARP Table

Assignment of MAC address and IP address
With the Address Resolution Protocol (ARP), there is a unique assignment of MAC address to
IP address. This assignment is kept by each network node in its own separate ARP table. The
WBM page shows the ARP table of the device.
Description
The table has the following columns:
● Interface
Shows the interface via which the row entry was learnt.
● MAC Address
Shows the MAC address of the destination or source device.
● IP Address
Shows the IPv4 address of the destination device.
● Media Type
Shows the type of connection.
– Dynamic
– Static
86
The device recognized the address data automatically.
The addresses were entered as static addresses.
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08