Configuration - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

4.8.2.2

Configuration

On this page, you configure the subnet for the interface.
Description
The page contains the following:
● Interface (Name)
Select the interface from the drop-down list.
● Interface Name
Enter the name of the interface.
● MAC Address
Displays the MAC address of the selected interface.
● DHCP
Enable or disable the DHCP client for this IPv4 interface.
● IP Address
Enter the IPv4 address of the interface. The IPv4 addresses must not be used more than
once.
● Subnet Mask
Enter the subnet mask of the subnet you are creating. Subnets on different interfaces must
not overlap.
● Broadcast IP Address
If a specific IP address is to be used as the broadcast IP address of the subnet, enter this.
Otherwise the last IP address of the subnet will be used.
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08
Configuring with Web Based Management
4.8 "Layer 3" menu
235