Siemens SIMATIC NET SCALANCE S615 Configuration Manual page 242

Configuring with Web Based Management
4.8 "Layer 3" menu
Description
● Type
Specify the type of address translation.
– Source: Replacement of the source IP address
– Destination: Replacement of the destination IP address
● Source Interface
Specify the source interface.
– VLANx: VLANs with configured subnet
– pppsx or usb0: WAN interface
– SINEMA RC: Connection to SINEMA RC Server
– IPsec: Either all IPsec VPN connections (all) or a specific IPsec VPN connection
– OpenVPN: Either all OpenVPN connections (all) or a specific OpenVPN connection
● Destination Interface
Specify the destination interface.
– VLANx: VLANs with configured subnet
– pppx or usb0: WAN interface
– SINEMA RC: Connection to SINEMA RC Server
– IPsec: Either all IPsec VPN connections (all) or a specific IPsec VPN connection
– OpenVPN: Either all OpenVPN connections (all) or a specific OpenVPN connection
● Source IP Subnet
Enter the subnet of the sender.
The subnet can also be a single PC or another subset of the subnet. Use the CIDR notation.
● Translated Source IP Subnet
Enter the subnet with which the subnet of the sender is replaced. Can only be edited with the
setting "Source".
The subnet can also be a single PC or another subset of the subnet. Use the CIDR notation.
● Destination IP Subnet
Enter the subnet of the recipient.
The subnet can also be a single PC or another subset of the subnet. Use the CIDR notation.
● Translated Destination IP Subnet
Enter the subnet that will replace the subnet of the receiver. Can only be edited with the
setting "Destination".
The subnet can also be a single PC or another subset of the subnet. Use the CIDR notation.
242
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08