Siemens SIMATIC NET SCALANCE S615 Configuration Manual page 272

Configuring with Web Based Management
4.9 "Security" menu
Description
● Interface
The list is dynamic.
– pppx or usb0 (only with M876-4)
– VLANx
– SINEMARC
– OpenVPN connection, IPsec VPN connection
● Access over the firewall is permitted to the following IPv4 services:
– All
– HTTP
– HTTPS
– DNS
– SNMP
– Telnet
– SMS Relay (M874 / M876 only)
272
Allows access from the WAN interface to the device.
Allows access from the IP subnet to the device. VLANs with configured IP subnet are
available.
Allows access from the SINEMA RC server to the device. Only available with KEY-PLUG
SINEMA RC.
Allows the VPN tunnel partners reachable via the VPN connection to access the device.
If you have created a VPN connection, the connection name will be displayed in the list.
All predefined IPv4 services.
For access to Web Based Management.
For secure access to Web Based Management.
Note
HTTP and HTTPS deactivated
If you disable HTTP and HTTPS, the WBM of the device can no longer be reached.
HTTPS disabled
When you disable HTTPS, you can only access the WBM using HTTP. This assumes
that "HTTP & HTTPS" is set in "System > Configuration > HTTP Services". If for example
"Redirect HTTP to HTTPS" is set, access via HTTP cannot be redirected to HTTPS. This
means that the WBM of the device can no longer be reached.
DNS queries to the device. Necessary only if the "DNS-Relay" function is enabled on the
device.
Incoming SNMP connections. Required, for example, to access the SNMP information
of the device using a MIB browser.
For unencrypted access to the CLI.
For sending SMS messages from the local network.
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08