Control Cycle Cycle150 - Siemens SINUMERIK 840D sl Programming Manual

2.14.3.2

Control cycle CYCLE150

Function
The activation of the logging function is performed by simply programming the CYCLE150 call.
The result display and logging can be selected separately and can be controlled independently.
Parameters in CYCLE150 have a modal effect until the end of the program or reset, or until
the cycle is called again.
Procedure
The logging is activated and deactivated via the program through the appropriate
parameterization of CYCLE150. This must be programmed once at the start of the measuring
program. Only when the input parameters are changed must the programming be performed
again before the respective measuring cycle call. At the end of the program (channel RESET),
the functions are deactivated automatically, explicit programming is not required.
The part program or ShopMill program to be processed has been created and you are in the
editor.
The screen form contains a selection field for activating and deactivating the measurement
result display with the toggle states "Off"/"On". It also contains a selection field for activating
and deactivating the logging with the toggle states "Off"/"On"/"Last measurement".
If both selections fields have the toggle state "Off", all the following input fields for the respective
function are hidden.
Parameter
Parameter
Measurement result display Off/On
Display mode
Log
Log type
Log format
(for standard)
Log data
Log storage
Name of log file
Measuring cycles
Programming Manual, 12/2017, 6FC5398-4BP40-6BA1
Description
autom. 8 s / NC start / for alarm
Standard log / User log
Text format / Tabular format
(file extension TXT/CSV)
New/Append
Directory / As part program / Variable
File type set according to selection of log format
1. Press the "Meas. workpiece" or "Meas. tool" softkey.
2. Press the "Meas. result" softkey. The "Measurement Re‐
sult" input window opens.
3. Make the required selection in the toggle fields (see follow‐
ing table).
Description
2.14 Miscellaneous functions
61