Measuring variants
3.3 Measure workpiece (milling)
3.3.5.2
Calling the measuring version
Procedure
The part program or ShopMill program to be processed has been created and you are in the
editor.
Parameter
G code program
Parameter
Description
PL
Measuring plane (G17 - G19)
Calibration data set (1 - 40)
F
Calibration and measuring fee‐
drate
Parameter
Description
Calibration directions ● 1: Calibration in one direction
● 2: Calibrations in opposite directions
Determine position
● Yes (determine position deviation of the probe)
deviation
● No (do not determine position deviation of the probe)
Measuring axis
● X (for G17)
● Y (for G17 and G19)
● Z (for G19)
Measuring direction
Measuring axis:
● (+/-) X (for G17)
● (+/-) Y (for G17 and G19)
● (+/-) Z (for G19)
122
1. Press the "Meas. workpiece" softkey.
2. Press the "Calibrate probe" softkey.
3. Press the "Radius at edge" softkey.
The input window "Calibrate: Radius at edge" opens.
4. In the selection field, Calibrate directions, select, "2".
Unit
-
-
Distance/
min
ShopMill program
Parameter
Description
T
Name of the probe
D
Cutting edge number (1 - 9)
Calibration data set (1 - 40)
F
Calibration and measuring fee‐
drate
X
Start point X of the measure‐
ment
Y
Start point Y of the measure‐
ment
Z
Start point Z of the measure‐
ment
Programming Manual, 12/2017, 6FC5398-4BP40-6BA1
Unit
-
-
-
mm/min
mm
mm
mm
Unit
-
-
-
-
Measuring cycles