Hi1036-18Xx* Probe Specifications - Hanna Instruments BL120 Instruction Manual

Analog outputs
BL121 & BL123 only
Three digital inputs
Single probe input
Power supply
Power consumption
Environment
Dimensions
Weight
Casing

4.3. HI1036-18XX* PROBE SPECIFICATIONS

Range pH
ORP
Temperature
Reference
Junction
Matching pin
Body
Top thread
Cable length
Connector
Maximum pressure @25 °C
Ordering codes
* XX - identifies the cable length
• Three configurable analog outputs, 4 to 20 mA, sourcing
• Output impedance ≤ 500 Ω
• Accuracy < 0.5 % FS
• Galvanic isolation, up to 50 V relative to earth
• Galvanic isolation, powered contact type
• One input for low level in acid / base tank (contact open)
• One input for low level in chlorine tank (contact open)
• One input for Hold mode (contact open)
• Probe type: HI1036-18XX pH / ORP /Temperature / Matching pin, combined digital
probe
• DIN waterproof connector
• Galvanic isolation
• RS485 interface
100 - 240 Vac
15 VA
• 0-50 ºC (32-122 ºF)
• Max. 95% RH non-condensing
245 x 188 x 55 mm (73 mm with pumps)
9.6 x 7.4 x 2.2" (2.9" with pumps)
1700 g (60 oz)
Wall mounted, built-in pump, IP65 rated
0.00 to 12.00 pH
±2000 mV
0.0 to 70.0 ºC (32.0 to 158.0 °F)
Ag / AgCl reference electrode (3.5M KCl)
Cloth
Yes
PVDF
3/4" NPT
2, 5, 10, 15, 20 m cable
DIN connector
3 bar (43.5 psi)
HI1036-1802 (probe with 2 m long cable)
HI1036-1805 (probe with 5 m long cable)
HI1036-1810 (probe with 10 m long cable)
HI1036-1815 (probe with 20 m long cable)
9