Hanna Cloud Setup (Bl122 & Bl123) - Hanna Instruments BL120 Instruction Manual

7.4. HANNA CLOUD SETUP (BL122 & BL123)
Hanna Cloud Options
These setting are required to permit cloud monitoring of your pool.
IP addressing: An Internet Protocol address (IP address) is a numerical label assigned to each device connected to a network
that uses the IP for communication. The DHCP (Dynamic Host Configuration Protocol) is a network management protocol
whereby a DHCP server dynamically assigns IP addresses to the instrument. STATIC means that the installer of the instrument
assigns a unique fixed address to the controller. This involves entering a four digit IP address, a four digit netmask (almost
always 255.255.255.0), the IP address of the gateway (the router used to connect
and the IP address of the DNS server.
Parameter Range / Options
Communication Enable

Disable

Network Type Ethernet
IP addressing DHCP
Static
IP Address addr01. addr02. addr03. addr04
Netmask netm01. netm02. netm03. netm04 255.255.255.0 Netmask address
Gateway gate01. gate02. gate03. gate04
DNS Address dns01. dns02. dns03. dns04
BL122 or BL123
Default settings Description
Enabled Option to enable/disable Hanna Cloud
communication module
Ethernet BL122 / BL123
DHCP Option to select dynamic or static IP
address
192.168.1.254 IP address
192.168.1.1 Gateway address
192.168.1.1 DNS server address
to the rest of the internet)
network connection type
29