Dss Console - NEC Xen Topaz System Hardware Manual

September 2004
S 3
E C T I O N
DSS C
ONSOLE
42 -
housing in place.
6. Install the fixing plate provided with the DLS Console to the bottom
of the console and phone to join the two sets together.
The 64BD DSS Console can be connected to the eighth extension port of
each 308M, 308E or 008E unit, i.e. ports 8, 16 or 24 only. Single-pair (2
wire) cabling is required to the outer pair (pins 1 and 4). Three consoles can
be connected in total when two port expansion cards (308E/008E) are
installed. The associated extension for each DSS Console is assigned in
system programming..
For the details of cabling, refer to the Section 3. (Page 3-3)
For the details of setting, refer to the Features Manual. (separate issue)
• When a DSS Console is used, the associated Key Telephone should be
desk mounted in the low position.
NEC Business Solutions Ltd
Figure 6-2:
Key Telephone & Console Installations