Key Telephone Wall Mounting - NEC Xen Topaz System Hardware Manual

Xen Topaz
Key Telephone & Console Installations

1.3 Key Telephone Wall Mounting

The Key Telephone's leg is able to use as Wall Mounting bracket. This
allows the phone to be mounted to a wall at a convenient location. The
Key Telephone also contains the hook-switch hanger, clipped at the
back of phone.
• The Key Telephone with DLS/DSS Console can not be mounted to a wall.
• Up to two screws are necessary. These are not attached to the phone.
1. Remove the leg from the phone, as illustrated above.
2. Remove the hook-switch hanger located at the back of phone.
3. Insert the hook-switch hanger in the slot below the hook-switch.
System Hardware Manual
- 37