Unpacking; Installing The 308E/008E Pcb - NEC Xen Topaz System Hardware Manual

September 2004
30 -

2.2 Unpacking

Unpack the 308E/008E and check it against the following list. Inspect
for physical damage.
Items
308E-A1
008E-A1

2.3 Installing the 308E/008E PCB

1. Open and pull out the Sub-Cover.
2. Loosen two screws and remove the Main-Cover.
3. Insert two Nylon-Spacers into the specified holes, and fasten two
Metal-Spacers into the specified holes. (Both Nylon and Metal
List of Contents
308E-A1 PCB
Nylon Spacers
Metal Spacers
Screws
008E-A1 PCB
Nylon Spacers
Metal Spacers
Screws
Trunk/Extension Cabling and Installing the Expansion PCBs
NEC Business Solutions Ltd
QTY
1
2
2
2
1
2
2
2