NEC Xen Topaz System Hardware Manual page 78

September 2004
70 -
3. Wait about 2 minutes. The connected Key Telephone's display will
show the Time & Date and Extension Number when the boot
sequence completes.
4. In case of a "COLD Start", change the SW1 position from "OFF" to
"ON" side.
• The default setting of extension number and name is as below.
Physical Port No.
1
2
:
The system will automatically assign the extension number and
name to each hardware port, even if the extension is not
connected.
For the details of numbering, refer to the Programming Manual (separate publication).
NEC Business Solutions Ltd
Extension
Extension Name
Number
200 EXT 200
201 EXT 201
: :
System Start Up