Secure The Ksu To The Wall; Wall-Wounting The Main Ksu - NEC Xen Topaz System Hardware Manual

Xen Topaz
Installing the Main KSU
2.2

Secure the KSU to the Wall

The main KSU (924M) must be mounted onto the wall. Before
installing, refer to the appropriate spacing as illustrated below.

2.3 Wall-wounting the Main KSU

1. Place the attached template on the wall to mark the four screw
positions.
2. Install four screws into the wall. The screw heads must remain out
about 3~5 mm.
• Wall-Mounting Screws (M4.1x25:4 pcs) are included with each KSU.
• The screw diameter is 4~4.5mm.
System Hardware Manual
- 23