Turn On The Perimeter With Delays - Bosch D720 User Manual

Turn On the Perimeter With Delays

I have this feature.
I do not have this feature.
This feature requires a passcode.
Command 3 is used to arm only the perimeter of your building, leaving the
interior disarmed. Once you enter Command 3, the exit delay time starts. You
now have a predetermined amount of time to leave before the perimeter arms.
Enter your personal passcode and press [ENT], to cancel Command 3.
Application
This arming command is useful in residential systems when you are leaving, but
members of your family, a baby-sitter, or a pet, are still inside the house.
In commercial installations, use this command to rearm your system when you
are on the premises, but not yet open for business.
COMMAND 3
Arming with Command 3:
1. Ensure all perimeter points are secure. Interior points are not
armed with this command and can remain faulted while arming
with Command 3. Perimeter point status lights should be off. If
not, refer to Force Arming the System on page 29.
2. Press the [COMMAND] bar. The Command mode indicator light
comes on.
3. Press the [3] key. The PERIMETER indicator light flashes, showing
the system has begun exit delay time. When the delay time
expires, the light remains steady.
4. To disarm your security system or cancel Command 3, enter your
personal passcode and press [ENT] before the delay time expires.
13