Bosch D720 User Manual page 29

Force Arming the System
I have this feature.
I do not have this feature.
If a protected door or window is open, you can have the option of force arming
with that point faulted. Faulted points (opened doors or windows) that are force
armed are not included in the system. The remaining points arm normally.
Your system might not offer force arming or it is restricted to specific points.
Contact your security company for more information.
To arm with points faulted:
1. Enter your personal passcode and press the [ENT] key, or enter
an arming command (COMMANDs 1, 2, or 3). The keypad emits
a buzz tone indicating a point is faulted.
2. Press the [COMMAND] bar and then the [ENT] key. The system
now arms all points that are normal.
Note: If the fault is restored (returned to normal) while arming, the point is
armed. If the fault is restored after arming, how your system is programmed
determines whether or not the point is armed with the rest of the system.
A faulted point is armed with the rest of the system if restored.
A faulted point is not armed with the rest of the system if restored
and is not be armed until I disarm the security system and re-enter
an arming command.
I am allowed to have a maximum of ______ points faulted when force arming.
29