Table of Contents
Advertisement
DISASSEMBLY AND REASSEMBLY
FUJICA GS645
2.
Range finder assembly (2- 12)
o
Disconnect the associated lead wires so that the flexible PCB assembly (2- 1) can
be removed together with the cover (2 - 13).
o
Remove the range finder assembly (2- 12) upward after removing three set screws
(2 - 8X2 and 2 - 9).
[REASSEMBLY]
o
Combine the pin (6- 37) of the linkage assembly with the interlock plate (2- 60).
o
Secure the flexible PCB assembly (2- 1) on the cover (2- 13) with a piece of
double - sided adhesive tape.
o
Combine the photocell (built in the flexible PCB assembly) with the photocell
frame (2- 35), and install the flexible PCB assembly with two screws (2- 2).
Fig. 4
2-52
-4-
Advertisement
Table of Contents
