Table of Contents
Advertisement
REASSEMBLY AND ADJUSTMENT
FUJICA GS645
the fn:m"i: cover
mechanism assembly
o
The optical axis of the !.ens must be perpendicular against the film plane, or
otherwise,
cannot be made correctly.
o
Based on the film
adjust parallelisrn of the lens plane.
ETHOD]
tools and instrument to be prepared.
Base plate
Reflector
Commater
a.
Check the
of the base
b. Place the rail
sace of
lens.
axis of the collimater and right angle (perpendicular alignment)
on the base plate, and place the reflector on the front
When the name ring is installed, remove it.
[Watch the front of the front lens
Set the collimater to the inifinite (
00 ),
check the reflected image, and adjust the
eight set screws ( 5 - 5) so that the reflected image is
in the center.
The
is within 30'.
'I'he parallelism is sati.sfactoty as long as the image is
within the field of view frame of the collimator (Gokosha Model).
WlJLen the
is
completely, lock the eight set screws
(5- 5)
with
screw
(Alonalpha
m
Sumicatight).
the
cannot be adjusted with the set screws ( 5 - 5):
o
check that the
is installed in parallel to the gate (5- 76).
o
Check that the
portion of the base plate (5- 60) is not deviated
When
it
may be adjusted by bending.
o
l\/lake sme that the front cover mechanism assembly has risen completely.
-18-
Advertisement
Table of Contents
