Table of Contents
Advertisement
REASSEMBLY AND ADJUSTMENT
FUJICA GS645
9.
Front cover linkage mechanism
[MOTION}
[Opening]
o
The lock levers (5- 62 and 5- 80) must hold the collar (4- 6) securely.
6
The housing is held by the rising portion of the base plate (5- 60)
and collar (4-6).
o
Check hooks (A), (B) and (C) to insure that they are functioning correctly.
o
Pay particular attention on the relationship between the springs (5- 42 and
5- 43) and levers (5- 80 and 5- 62).
The springs should not be held or bit.
Furt];ler, the spring force must be
transmitted to the levers smoothly.
o
Use a collar of the optimum diameter. ·
o
The caulking must have been made correctly.
[Closing . (Folding)]
Make sure that the hooks (A), (B) and (C) (6 positions) disengage correctly
whim the pusb lever (5- 50) is pressed.
-44-
Advertisement
Table of Contents
