Tools Required For Assembly - Agri-Fab 45-0529 Manual

ASSEMBLY

TOOLS REQUIRED FOR ASSEMBLY

(1) Pliers
(2) 7/16" Wrenches
(2) 1/2" Wrenches
(2) 9/16" Wrenches
(1) 3/4" Wrench
STEP 1: (SEE FIGURE 1)
1. Verify that all parts and all fasteners on pages 2 and
3 are included in the carton and parts bag. Refer
to page 3 to identify fasteners used in the following
instructions.
2. Insert the hitch bracket (8) through the slot in the
tongue and secure it with two 5/16" x 1" (C) hex bolts
and 5/16" nylock nuts (H).
3. Install the 1/2" x 1-3/4" clevis pin (U) and the 5/32"
hair cotter pin (R) in the hitch bracket (8) and tongue.
U
C
8
R
FIGURE 1
H
STEP 2: (SEE FIGURE 2)
1. Attach the pivot clevis to the tongue using a 1/2" x
1-1/8" bolt (E), a 5/8" x .656" washer (P), a 1/2" x
1-1/2" washer (N), a 1/2" lock washer (O), and a 1/2"
jam nut (G).
FIGURE 2
STEP 3: (SEE FIGURE 3)
1. Assemble a 5/16" screw (F), a spacer (K), and a 5/16"
nylock nut (H) to the tongue.
FIGURE 3
4
E
P
11
G
F
K
H
N
O