Advertisement
Quick Links
Agri-Fab
OWNERS
MANUAL
Model No.'s
45-01011
45-01713
190-653A
190-368B
CAUTION:
Read Rules for
Safe Operation
and Instructions
Carefully
PRINTED IN USA
¨
(SEE SPECIFICATIONS ON PAGE 7)
Assembly
Operation
Maintenance
Repair Parts
the fastest way to purchase parts www.speedepart.com
UTILITY CARTS
FORM NO. 48459 (REV. 7/03)
Advertisement
Related Manuals for Agri-Fab 45-01011
Summary of Contents for Agri-Fab 45-01011
- Page 1 ¨ Agri-Fab OWNERS MANUAL Model No.'s 45-01011 45-01713 190-653A 190-368B UTILITY CARTS (SEE SPECIFICATIONS ON PAGE 7) CAUTION: Read Rules for Assembly Safe Operation Operation and Instructions Maintenance Carefully Repair Parts the fastest way to purchase parts www.speedepart.com PRINTED IN USA...
-
Page 2: Safety Rules
SAFETY RULES Remember, any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise caution at all times when using power equipment. CAUTION: VEHICLE BRAKING AND LOOK FOR THIS SYMBOL TO POINT OUT STABILITY MAY BE AFFECTED WITH IMPORTANT SAFETY PRECAUTIONS. - Page 3 HARDWARE SHOWN FULL SIZE Not Shown Full Size (45-01713 & 190-368B Only) FIGURE 1 - HARDWARE PACK 45-01011 45-01713 Ref. Description 190-653A 190-368B Hex Bolt, 1/4" x 1/2" Hex Bolt, 3/8" x 1" Truss Hd. Bolt, 5/16" x 3/4" Lg.
- Page 4 5. Position the tailgate reinforcement bracket on ASSEMBLY INSTRUCTIONS outside of cart as shown in figure 3. Assemble to the bottom of the cart body using four 5/16" x 3/4" TOOLS REQUIRED FOR ASSEMBLY truss head bolts and 5/16" hex nuts. Do not Screwdriver tighten.
- Page 5 9. Assemble the front panel over the end of the cart 11. Turn the latch stand bracket so that the aligning tab using four 1/4" x 1/2" hex bolts and 1/4" hex nuts is at the rear (bottom) of the bracket. Assemble the as shown in figure 5.
- Page 6 13. To prevent accidental tipping during the following 16. Hook the short end of the spring into the hole in the assembly procedures, lower the cart to rest upside latch lock lever. Use the spring puller tool to hook the down on its top flanges, so that the wheel support is long end of the spring into the square hole in the facing up.
-
Page 7: Maintenance
CART MODEL SPECIFICATIONS THE ADDITION OF AN ACCESSORY OR AN ATTACHMENT. BE AWARE OF CHANGING CONDITIONS ON SLOPES. MODELS 45-01011 & 190-653A 10 Cu. Ft. (Std.) Tires: 16.00" x 4.0" Pneumatic 1. Refer to the vehicle owners manual for instructions Axle: 3/4"... - Page 8 REPAIR PARTS FOR UTILITY CARTS MODELS 45-01011, 190-653A, 45-01713 & 190-368B...
- Page 9 REPAIR PARTS LIST FOR UTILITY CARTS MODELS 45-01011, 190-653A, 45-01713 & 190-368B REF. PART 45-01011 45-01713 DESCRIPTION 190-653A 190-368B 23985 Cart Body 23502 Tailgate 62458 Tailgate Reinforcement Bracket 23548 Guide, Tailgate 23492 Front Panel 23506 Wheel Support ----- 23507 Wheel Support...
- Page 10 NOTES...
-
Page 11: Slope Guide
SLOPE GUIDE (Keep this sheet in a safe place for future reference.) Use this guide to determine if a slope is safe for the operation of your tractor and cart. Refer also to the instructions in your vehicle owners manual. - Page 12 REPAIR PARTS Agri-Fab, Inc. 303 West Raymond Sullivan, IL. 61951 217-728-8388 www.agri-fab.com © 2001 Agri-Fab, Inc.