Advertisement
5.1.1
Joystick is not in neutral position when switched on
If the joystick is not in the neutral position when you switch the remote on, the "not in neutral
position" lock will be set during start-up. This function prevents the wheelchair from moving
unintentionally.
You can tell the "not in neutral position" lock is on if:
• All LEDs on the driving profile display blink continuously.
• The wheelchair cannot be driven.
To release the "not in neutral position" lock within the first 4 seconds:
• Move the joystick into the neutral position.
The error is removed as soon as the driving profile display no longer blinks.
To release the "not in neutral position" lock after the first 4 seconds:
• Switch off the remote.
• Switch on the remote.
If the error persists, please contact your Invacare® specialist dealer!
53
Advertisement
