Advertisement
How to select the mode
• Press buddy button 3 to start the scan.
• Once the required mode has been selected, press buddy button 3 to activate the mode.
The following chapter describes how to proceed if you want to use the various modes in scanning
mode:
• Driving with a buddy button (please see page 40)
• Electrically adjusting your seat using the buddy button (please see page 42)
• Controlling an ECU with a buddy button (please see page 43)
• Sounding the horn with a buddy button (please see page 44)
• Operating the lighting with a buddy button (please see page 44)
4.12.2 Driving with a buddy button
NOTE:
Once the defined number of scan cycles has been reached, the remote returns to mode selection.
How to drive with a buddy button
• Press buddy button 3 when the display illuminates.
The remote switches to drive mode and scans the available
driving profiles.
• Press buddy button 3 when the required driving profile is
displayed.
40
Advertisement
