Advertisement
4.4
Switching on the remote
NOTE:
You will require an input device such as (typically) a joystick to operate the G91S.
How to switch the remote on
• Press the "ON/1OFF" button (1).
or
• press buddy button 2.
The operating mode which was in use when switching off is
displayed.
Please refer to "Bottom side" on page 12 for an exclamation of buddy button numbering.
NOTE:
If the joystick is not in the neutral position when you switch the remote on, the "not in neutral
position" stop will be set and the mobility device cannot drive. Please refer to "Joystick is not in
neutral position when switched on" on page 53 for fault repair.
21
Advertisement
