Removing 3.5-Inch Hard Disk Drive - NEC Express5800/320Lb User Manual
Hide thumbs
Also See for Express5800/320Lb:
- Release note (19 pages) ,
- User manual (302 pages) ,
- Release note (8 pages)
Table of Contents
Advertisement
Removing 3.5-inch Hard Disk Drive
Follow the procedure below to remove the hard disk.
IMPORTANT: Make sure to read "Anti-static Measures" and
"Preparing Your System for Upgrade" before starting installing or
removing options.
Shutdown Windows 2000 Advanced Server.
1.
The system turns off automatically and the POWER LED goes off.
Disconnect all the power cords from the power outlet.
2.
<Tower model>
3.
Unlock the front bezel with the security key and open it.
<Rack-mount model>
Unlock the front bezel with the security key and remove the upper and lower panels.
Push the lever of the hard disk to unlock
4.
the handle.
Hold the handle and hard disk to pull them
5.
off.
Install the dummy tray in an empty tray
6.
according to procedures described in
"Installation".
Make sure to install the dummy tray in the
empty slot to improve the cooling effect
within the device.
System Upgrade 8-9
Advertisement
Table of Contents
