Installation, Relocation, Storage, And Connection - NEC Express5800/320Lb User Manual

1-10 Precautions for Use

Installation, Relocation, Storage, and Connection

Disconnect the power cord(s) before installing or removing the equipment.
Be sure to power off the equipment and unplug its power cords from the wall
outlet before installation/relocation. All voltage is removed only when the
power cords are unplugged.
Never attempt to lift the equipment alone.
The equipment weighs around 70 kg (depending on its hardware configuration).
If you carry it alone, you may strain your back. It takes at least four people to
carry it; hold the equipment firmly by its bottom. Do not hold the front bezel, or
it may become detached, causing an injury.
Do not install the equipment in an unsuitable place .
Install the equipment in such a place as specified in this User's Guide. Avoid
the following, or there is a risk of a fire.
Be careful not to hurt your fingers.
Exercise great care not to hurt your fingers on the rail when you
mount/dismount the equipment into/from the rack.
a dusty place
a humid place located near a boiler, etc
a place exposed to direct sunlight
an unstable place
WARNING
CAUTION