Panasonic CQ-DF602U Operating Instructions Manual page 46

Operating Instructions
Basic
(1) Network (IPv4) Configures the IPv4 network settings to connect the
(2) Network (IPv6) Configures the IPv6 network settings to connect the
(3) IPsec
(4) UPnP
(5) DynamicDNS
(6) Date and Time Sets the date and time, automatic time adjustment and
(7) Camera
(8) Audio
Account
(9) Administrator
*1
(10)
General User
Buffer/Transfer
(11) Trigger
(12) Motion
Detection
(13) Alarm Log
Advanced
(14) Image Display
46
camera to the network (see page 48).
camera to the network (see page 53).
Enables IPsec (Transport or Tunnel mode) (see page
57).
Enables automatic port forwarding and creates a
shortcut to the camera (see page 67).
Registers with a DNS service, such as Viewnetcam.com
service (see page 70).
daylight saving time settings (see page 77).
Sets camera name, white balance, AC power source
frequency, automatic focus range, mounting type, pan/
tilt range, return to specified position, color night view,
and vertical resolution settings (see page 80).
Sets output, volume, PC audio input timeout, input,
camera microphone sensitivity and mute during pan/tilt
settings (see page 86).
Sets authentication and administrator security (user
name and password) (see page 88).
*1 Sets general user security (user name and password)
and access levels (see page 93).
Sets image buffer or transfer by timer, alarm, or motion
detection (see page 97, page 107, or page 119).
Sets the threshold and sensitivity for motion detection
(see page 133).
Sets the information required to send log notifications by
e-mail (see page 137).
Sets the resolution, image quality and refresh interval of
the Single Camera and Multi-Camera page, as well as
time stamp setting, language and banner (see page
145).