Panasonic CQ-DF602U Operating Instructions Manual page 81

Setting
Camera Name
White Balance
AC Power
Source
Frequency
Automatic
Focus Range
Mounting Type
• The camera name is displayed on the Single Camera
page.
• Enter ASCII characters (see page 190) or characters from
other languages (1—15 characters for a 1-byte character
and 1—7 characters for a 2-byte character). Note that
[Space], ["], ['], [&], [<], and [>] are not available.
Select from the following options. "K (Kelvin)" is a unit for color
temperature.
• Auto (default)
• Fixed Indoor
• Fixed Fluorescent
(White)
• Fixed Fluorescent
(Daylight)
• Fixed Outdoor
• Hold
Note
• White balance settings are also saved in the home
position, alarm position and preset positions.
This setting may correct flickering caused by power line
frequency.
• 50 Hz
• 60 Hz (default)
Set to "Macro" when viewing objects that are within 1 m (3 feet
3 inches) of the camera. Set to "Normal" when viewing objects
that are 1 m (3 feet 3 inches) or further from the camera.
• When positioning the camera in front of a window to view
images on the other side of the window, set the Automatic
Focus Range to "Normal".
Set to match the installation method used to mount the camera.
• When set to "On the ceiling", the available tilt range is 0 to
+90 degrees.
• When set to "On the table", the available tilt range is -120
to 0 degrees.
Description
— Automatic adjustment
— Electric bulb (2800 K)
— White type fluorescent light
(3600 K)
— Daylight type fluorescent light
(4000 K)
— Solar light (6000 K)
— Setting [Hold] keeps the current
white balance.
Operating Instructions
81