Operating Instructions
IPsec Mode Selection
Select transport mode or tunnel mode to access the camera.
Transport Mode (IPv4 Only)
The image is encrypted for the whole way between the camera and your PC. The
transport mode is available only in IPv4 for users of Windows XP Service Pack 1
or later.
Prepare the following required items:
Item
PC
Camera
58
Operating
System
Web Browser
ISP Service
Note
•
To use IPsec, you need to set up your operating system. See
the Panasonic Network Camera support website at http://
panasonic.co.jp/pcc/products/en/netwkcam/ for setup
details.
ISP Service
Transport Mode
Encrypted
Supported Feature
: Windows XP Service Pack 1 or later
: Internet Explorer 6.0 or later
: A service for multiple global addresses (A
global address must be set up on your PC.)
: A service for multiple global addresses (A
global address must be set up to the camera.)