Panasonic CQ-DF602U Operating Instructions Manual page 129

Ac adaptor type/poe type
Hide thumbs Also See for CQ-DF602U:
Table of Contents

Advertisement

9.
After you confirm the settings and click [Next>], set E-mail notification and
click [Next>].
If you select [Enable], the E-mail Notification When Triggered page is
displayed. Enter the settings referring to page 127–128.
Setting
Disable
Enable
10.
Click [Save] after confirming the settings.
The new settings are saved.
When finished, "Success!" is displayed.
11.
Click [Go to Trigger page].
The Trigger page is displayed.
Note
If you set a short interval when transferring images to a cell phone, many E-
mails will be sent, which may lead to a large phone bill. Therefore, we
recommend you to set a long interval. 1 image per minute frequency is
recommended.
Motion Detection transfer stops operating until after the camera finishes all
transfers. For example, if the camera transfers 3 images per minute and 6
images in total, Motion Detection will follow the pattern below.
Detectable
A Motion Detection signal is detected.
The camera does not send an E-mail notification when
buffering or transferring images.
The camera sends an E-mail notification (up to 3
destinations) when buffering or transferring images.
120 seconds
1st
2nd 3rd
4th
Undetectable
Description
5th
6th
Detectable
Operating Instructions
129

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bb-hce481aBb-hcm381aBb-hhce481aBb-hhcm381a

Table of Contents