Panasonic CQ-DF602U Operating Instructions Manual page 65

Setting
IPsec
Encoding strength
7.
Click [Restart].
8.
Set up your VPN router as shown below.
• To use tunnel mode, you need to set up your VPN router.
IKE Items
Phase 1
Phase 2
*1 The camera does not support aggressive mode.
• Check the box to enable IPsec features. If you uncheck
the box, all IPsec features will be invalid.
• The encoding strength for IPsec can be selected. If you
select [Standard], DES or NULL is valid as an
algorithm, and the data will become easier to decrypt.
Authentication
Method
ID
Mode
Diffie-Hellman
MODP Group
Cipher Algorithm
Message-Digest
Algorithm
Lifetime
Mode
PFS
Cipher Algorithm
Message-Digest
Algorithm
Lifetime
Description
Settings
Pre-shared Key Method
Specifies by address.
*1
Main mode
Specifies 1 or 2.
Select from DES-CBC, 3DES-CBC or
AES-CBC (128, 192, 256 bits).
(Multiple selections are available.)
HMAC-MD5, HMAC-SHA-1
Specifies by 28800 s (Byte setting is
not supported.)
Quick mode
Specifies either of Off, D-H Group 1
or D-H Group 2.
Select from DES-CBC, 3DES-CBC,
AES-CBC (128, 192, 256 bits) or
NULL. (Multiple selections are
available.)
HMAC-MD5-96, HMAC-SHA-1-96
Specifies by 28800 s (Byte setting is
not supported.)
Operating Instructions
65