Table of Contents
Advertisement
24 24 24 24 24
Init Display First (PCI Slot)
Use this item to specify whether your graphics adapter is installed in one
of the PCI slots or is integrated on the motherboard.
Fast Chip Select (Auto)
This item allows you to read the Data transfer from CPU to GMCH.
CPC Addr/Control (Auto)
This enables the DDR channel A and channel B memory access to reduce
the loading for selective CPC 9Clock Per Command).
Turbo Mode (Auto)
This item increases the performance of CPU L2 cache timing at high
speed.
On-chip VGA (Enabled)
Enables and disables the built-in on-chip VGA.
On-chip Frame Buffer Size (8MB)
This allows you to set the VGA frame buffer size.
Boot Display (Auto)
This item for Intel define ADD card only.
Integrated Peripherals
These options display items that define the operation of peripheral
components on the system's input/output ports.
Phoenix-AwardBIOS CMOS Setup Utility
Integrated Peripherals
OnChip IDE Device
Onboard Device
SuperIO Device
: Move
Enter: Select
F5:Previous Values
F6:Fail-Safe Defaults
OnChip IDE Device (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
Phoenix-AwardBIOS CMOS Setup Utility
OnChip IDE Device
IDE HDD Block Mode
On-Chip Primary PCI IDE
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Primary Master UDMA
IDE Primary Slave UDMA
On-Chip Secondary PCI IDE
IDE Secondary Master PIO
IDE Secondary Slave PIO
IDE Secondary Master UDMA
IDE Secondary Slave UDMA
ATA 66/100 Cable Msg
*** On-Chip Serial ATA Setting ***
SATA Mode
On-Chip Serial ATA
Serial ATA Port0 Mode
x
Serial ATA Port1 Mode
: Move
Enter: Select
F5:Previous Values
F6:Fail-Safe Defaults
Using BIOS
[Press Enter]
Item Help
[Press Enter]
[Press Enter]
Menu Level
+/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F7:Optimized Defaults
[Enabled]
Item Help
[Enabled]
[Auto]
Menu Level
[Auto]
[Auto]
If your IDE hard drive
[Auto]
supports block mode select
[Enabled]
Enabled for automatic
[Auto]
detection of the optimal
[Auto]
number of block read/
[Auto]
writes per sector the drive
[Auto]
can support
[Enabled]
[IDE]
[Disabled]
[PrimaryMaster]
Primary Master
+/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F7:Optimized Defaults
Advertisement
Table of Contents
