Checking Jumper Settings; Setting Jumpers - ECS 865GV-M Deluxe Manual

6

Checking Jumper Settings

This section explains how to set jumpers for correct configuration of the
motherboard.

Setting Jumpers

Use the motherboard jumpers to set system configuration options. Jumpers
with more than one pin are numbered. When setting the jumpers, ensure
that the jumper caps are placed on the correct pins.
The illustrations show a 2-pin
jumper. When the jumper cap is
placed on both pins, the jumper
is SHORT. If you remove the
jumper cap, or place the jumper
cap on just one pin, the jumper is
OPEN.
This illustration shows a 3-pin
jumper. Pins 1 and 2 are SHORT
SHORT OPEN
Installing the Motherboard
Checking Jumper Settings
The following illustration shows the location of the motherboard jumpers.
Pin 1 is labeled.