Table of Contents
Advertisement
6.
Install any remaining DIMM modules.
Table A: DDR (memory module) QVL (Qualified Vendor List)
The following DDR400 memory modules have been tested and qualified for
use with this motherboard.
Size
Vendor
128MB
SAMSUNG
Micron
NANYA
Infineon
NANYA
SAMSUNG
256MB
NANYA
Micron
Infineon
Micron
NANYA
Infineon
512MB
SAMSUNG
NANYA
Micron
NANYA
SAMSUNG
Infineon
Module Name
M368L1713DTM-CC4
MT8VDDT1664AG-403B2
NT128D64SH4B1G-5
HYS64D16301GU-5-B
NT128D64SH4B1G-5T
M368L3223DTM-CC4
NT256D64S88B1G-5
MT16VDDT3264AG-403B2
HYS64D32300GU-5-B
MT8VDDT3264AG-40BC4
NT256D64S88B1G-5T
HYS64D32300HU-5-C
M368L6423DTM-CC4
NT512D64S8HB1G-5
MT16VDDT6464AG-40BC4
NT512D64S8HB1G-5T
M368L6423ETM-CC4
HYS64D64320HU-5-C
Installing the Motherboard
Installing a Hard Dish Drive/CD-ROM/SATA Hard
Drive
This section describes how to install IDE devices such as a hard disk drive and
a CD-ROM drive.
About IDE Devices
Your motherboard has a primary and secondary IDE channel interface (IDE1
and IDE2). An IDE ribbon cable supporting two IDE devices is bundled with
the motherboard.
You must orient the cable connector so that the pin1 (color) edge
of the cable correspoinds to the pin 1 of the I/O port connector.
IDE1: Primary IDE Connector
The first hard drive should always be connected to IDE1.
IDE2: Secondary IDE Connector
The second drive on this controller must be set to slave mode. The
cinfiguration is the same as IDE1.
11
Advertisement
Table of Contents
