Table of Contents
Advertisement
PCI/VGA Palette Snoop (Disabled)
This item is designed to overcome problems that can be caused by some
non-standard VGA cards. This board includes a built-in VGA system that
does not require palette snooping so you must leave this item disabled.
Assign IRQ For USB (Enabled)
Names the interrupt request (IRQ) line assigned to the USB on your
system. Activity of the selected IRQ always awakens the system.
INT Pin 1-8 Assignment (Auto)
Identifies the interrupt request (IRQ) line assigned to a device connected to
the PCI interface of your system.
PC Health Status
On motherboards that support hardware monitoring, this item lets you
monitor the parameters for critical voltages, critical temperatures, and
fan speeds.
Phoenix-AwardBIOS CMOS Setup Utility
PC Health Status
Target Temperature
Shutdown Temperature
Current System Temperature
Current CPU Temperature
SYS FAN Speed
CPU FAN Speed
PWR FAN Speed
CPU Vcore
1.5 V
3.3 V
5.0 V
Battery Voltage
: Move
Enter: Select
+/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F5:Previous Values
F6:Fail-Safe Defaults
[Disabled]
Item Help
[Disabled]
Menu Level
Enabled thortting
when CPU over target
temperature
F7:Optimized Defaults
Using BIOS
Target Temperature (Disabled)
This item enables throttling when CPU targets the temperature.
Shutdown Temperature (Disabled)
Enables you to set the maximum temperature the system can reach before
powering down.
System Component Characteristics
These items allow end users and technicians to monitor data provided by
the BIOS on this motherboard. You cannot make changes to these fields.
•
Current System Temp
•
Current CPU Temp
•
SYS FAN Speed
•
CPU FAN speed
•
PWR FAN speed
•
CPU Vcore
•
Battery Voltage
31 31 31 31 31
Advertisement
Table of Contents
