Technical Data; Machine Features - Festool VECTURO OS 400 E Original Operating Manual

OS 400 E
GB
CAUTION
When working with noise
Damage to hearing

Always use ear protection.
Vibration emission value a
directions) and uncertainty K measured in accor-
dance with EN 60745:
Vibration: Categorisation of
Festool tools according to
1
vibration class
VK0
VK1
VK2
VK3
K
1.
Please refer to page 6 for information on the vibration class as-
signed to each tool.
The specified emission values (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary esti-
mates regarding vibration and noise loads during
operation.
– They represent the primary applications of the
power tool.
Increase possible for other applications, with other
insertion tools or if not maintained adequately. Take
note of idling and downtimes of machine!
3 Intended use
Oscillator designed for
– cutting wood (max. 78 mm), plastic, glass-fibre
reinforced plastic (GRP), plasterboard and non-
ferrous metals (max. 1 mm),
– Scraping away carpet residues and cutting elas-
tic sealant,
– in a weatherproof environment,
– with tools and accessories manufactured by Fes-
tool.
Not suitable for removing windows from passenger
cars, trucks and buses or renovating concrete
joints and for sanding.
The user is liable for improper or non-in-
tended use.
14
(vector sum for three
h
Vibration emission
2
value a [m/s ]
h
< 2,5
< 5,0
< 7,0
< 10,0
3,0
4

Technical data

Oscillator
Power consumption
Power output
Nominal oscillation rate
Oscillation angle
Weight
Safety class
5

Machine features

[1-1] Clamping lever for changing tools
[1-2] On/Off switch
[1-3] Speed control
[1-4] Gripping surface
[1-5] Cooling air openings
[1-6] Tool
[1-7] Adapter*
[1-8] Depth stop with sliding shoe*
[1-9] Rotary depth stop*
[1-10] Positioning aid*
* not on all versions included in the scope of deliv-
ery
The specified illustrations appear at the beginning
of the Operating Instructions.
6 Commissioning
WARNING
Unauthorised voltage or frequency!
Risk of accident

The mains voltage and the frequency of the pow-
er source must correspond with the specifica-
tions on the machine's name plate.

In North America, only Festool machines with
the voltage specifications 120 V/60 Hz may be
used.
The switch [1-3] is an on/off switch (I = ON, 0 =
OFF).
 In case of a power failure or if the mains con-
nector is removed, move the on/off switch im-
mediately to the Off position. This prevents un-
controlled restarting.
OS 400 E
400 W
220 W
-1
10000 - 18500 min
2,0°
1,55 kg
/II