Waste Container - Fuji Xerox ApeosPort C7070 Reference Manual

Reference Guide Optional Units

Waste Container

Note Replace the Waste Container while the machine is on.
1.
Confirm that the machine is not operating, and lift the
Center Tray Cover.
2.
Hold the handle and pull out the Hole Punch Waste Con-
tainer.
3.
Dispose of all cut pieces.
4.
Insert the Waste Container into the original position.
5.
Close the Center Tray Cover.
Paper Jams
If paper is jammed, the machine stops and an alarm sounds. A message also appears on the touch panel dis-
play. Follow the instructions displayed to remove the jammed paper.
Gently remove the paper being careful not to tear it. If paper is torn while it is being removed from the
machine, remove all the torn pieces making sure that none remain inside the machine.
When you have finished clearing the paper jam, printing is automatically resumed from the state before the
paper jam occurred. If a paper jam occurred during copying, tap on [Start]. Copying is resumed from the
state before the paper jam occurred.
Note Clear the paper jams while the machine is on.
Upper Cover
1.
Open the Upper Cover (
paper ( ).
2
2.
Close the Upper Cover.
) and remove the jammed
1
-28-
1
2