Finisher C - Fuji Xerox ApeosPort C7070 Reference Manual

Reference Guide Optional Units
v

Finisher C

p.30 Device Components
p.33 Outputting Paper
p.33 Staple Cartridge
p.40 Waste Container
p.41 Paper Jams
In this guide, "Finisher C3" and "Finisher C3 with Booklet Maker" are generally referred to as "Finisher C".
Device Components
No. Name
1 Hole Punch Waste Container
2 Output Tray
3 Finisher Tray
4 Staple cartridge for side stitch
5 Booklet Tray*
Cover
6
7 Booklet Maker Unit
8 Staple cartridges for saddle stitch*
*In case of Finisher with Booklet Maker
1
8 7
Punched pieces go in here.
Paper is ejected.
Side stitch paper is ejected.
This unit is used to replace staples for side stitch.
Saddle stitch paper is ejected.
Open this door to clear paper jams, replace staples, remove jammed sta-
ples or dispose of cut pieces for punched holes.
This device is used to fold paper into two or staple folded paper.
This unit is used to replace staples for saddle stitch. There are two.
-30-
2
3
4
5
6
Description