Staple Jams - Fuji Xerox ApeosPort C7070 Reference Manual

Reference Guide Optional Units
4.
Insert a new staple case into the cartridge (
push the back side (
5.
Insert the cartridge into the original position.
Hold the lever and lightly press it up until you hear a click.
6.
Close the cover.

Staple Jams

If paper is not being stapled or if staples are bent, follow the procedures mentioned in the following pages.
If the issue isn't resolved even after the procedure, contact our customer support center or sales agency.
If the staple looks like any of the following images, contact our customer support center or sales agency.
One side of the staple is
loose
Please be very careful not to hurt your fingers, etc. when removing the jammed staple.
Important
Depending on the usage condition, such as the paper type, staples may be bent or bent staples may be

caught inside of the unit, causing paper jamming.
If you open the Staple Cartridge cover, be sure to remove all bent staples. Not removing bent staples may

cause staple jamming. Only open the Staple Cartridge cover when you are removing the jammed staples.
).
2
Paper is not stapled
Staple is bent in
the wrong direction
Staple is loose
) and
1
Staple is bent
Staple is loose, and
the center sinks
Caution
-16-
2
1
Staple is collapsed