Cisco WLC 5700 Series Command Reference Manual page 69

Layer 2/3 Commands
switchport
Examples
This example shows how to cause an interface to cease operating as a Layer 2 port and become a Cisco-routed
port:
Controller(config-if)# no switchport
This example shows how to cause the port interface to cease operating as a Cisco-routed port and convert to
a Layer 2 switched interface:
Controller(config-if)# switchport
Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series)
OL-32323-01 61