Cisco WLC 5700 Series Command Reference Manual page 47

Layer 2/3 Commands
Command Default
The default is src-mac.
Command Modes
Global configuration
Command History
Release
Cisco IOS XE 3.2SE
Usage Guidelines
You can verify your setting by entering the show running-config privileged EXEC command or the show
etherchannel load-balance privileged EXEC command.
Examples This example shows how to set the load-distribution method to dst-mac:
Controller(config)# port-channel load-balance dst-mac
OL-32323-01
Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series)
port-channel load-balance
Modification
This command was introduced.
39