Labeling The Function Keys - TCS Carus Adapto Instruction Manual

Labeling the function keys 1 - 20

There is an embedded black cover with a little slot on the right side located at the
underside of the device near the labeling fi eld.
Please insert the enclosed opening tool (small metal angle) into the slot and softly
press the tool upwards to loosen the name plate cover from the housing. Pull the labe-
ling cover downwards from the housing together with the labeling carrier.
The labeling stripe can be easily removed, the programmed button functions can be
entered.
Insert the complete labeling carrier back into the guidance rail until the cover is locked
into place by a magnetic holder.
Please fi nd suitable labeling templates on our website.
www.carus-concepts.com
12