ANCHOR-WEDGE
3/4-10 x 4-3/4
SEE NOTES
P/N 0515388_L
CASE LINEUP
Notes
Determine hole locations and set all anchors before case
is in place. Avoid obstructions under case or on floor when
planning anchor locations. Two brackets required at each
case joint and case end. See plan view. Equal number of
brackets should be on front and back of case.
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
ANCHORS REPRESENTED BY "X"
STANDALONE CASE
Caution: Tipping Hazard
Case tipping may occur if cases are not
properly leveled and secured.
PLAN (TOP) VIEW
Medium Temperature
EcoVision II Doors
with
1-15
Excel