Fasten End Frames; Fasten Canopies - Hussmann Multi-deck Merchandiser Installation & Operation Manual

I
1-12
nstallatIon

Fasten End Frames

1. In both holes in bottom shoe, place a
2-inch neoprene washer between end frame
and metal washer of each merchandiser.
Loosely assemble bolt, washers, lockwasher
and nut as shown.
DO NOT TIGHTEN FULLY.
Do not attempt to draw merchandisers together
using nut and bolt.
Neoprene
Metal Washer
Washer

Fasten Canopies

1. Insert a machine screw (#10 x 1
through each hole in canopy end cap, align
and insert into joining canopy end cap.
Fasten with nuts. See detail at top right.
Do not tighten fully.
2. Draw canopies of multi-deck wall
merchandisers together by using a bolt, flat
washers, lockwasher and nut in the joining
brackets atop the canopy. See detail at right.
Tighten only until canopies touch.
P/N 0515388_L
Nut
Lock Washer
1
/ in.)
4
U.S. & Canada 1-800-922-1919 • Mexico 01-800-890-2900 • www.hussmann.com
Neoprene Washer
Case
End
Frames
Metal
Washer
Bolt
Detail for Connecting Merchandiser End Frames
Flat Washer
Bolt
Joining
Bracket
Machine
Screw
#10 x 1 /
1
4
Hex Nut
Detail for Connecting Canopies
of Multi-deck Wall Merchandisers
Neoprene Washer
Metal
Washer
Lock
Washer
Nut
Hex Nut
Joining
Bracket
Lockwasher
Hex Nut