Mitsubishi Electric 800 Series Instruction Manual page 105

 Service
Class
Get_Attribute_Single
Get_Attributes_All
 Class attribute
No.
1 Revision
 Instance attribute
No.
1 Vendor ID
2 Device Type
3 Product Code
Revision
4 Major revision
Minor revision
5 Status
6 Serial Number
7 Product Name
11 Active language
12 Supported Language List
• Status (Attribute 5)
Bit
0 Module Owned
1 —
2 Configured
3 —
4 to 7 Extended Device Status
8 Minor Recoverable Fault
9 Minor Unrecoverable Fault
10 Major Recoverable Fault
11 Major Unrecoverable Fault
12 to 15 —
 Assembly Object (04h)
The Assembly object uses static assemblies and holds the Process Data sent/received by the inverter. All instances are
predefined for specific drive profile parameters.
104
2. Ethernet Communication
2.11 EtherNet/IP
Instance
Get_Attribute_Single
Set_Attribute_Single
Get_Attributes_All
Reset (inverter reset)
Name Access
Get
Name Access
Get
Get
Get
Get
Get
Get
Get
Set
Get
Name
CIP connection established
Fixed to 0
Fixed to 1 (configured)
Fixed to 0
0000b: Unkown
0010b: Faulted I/O Connection (ExclusiveOwner connection timed out)
0011b: No I/O connection establish (I/O connection not established)
0100b: Non volatile configuration bad
0101b: Major fault (Bit 10 = 1)
0110b: Connection in Run mode (I/O connection established, with Run mode
connection)
0111b: Connection in Idle mode (I/O connection established)
Warning or alarm
Fixed to 0
Fault
Fixed to 0
Fixed to 0
Type
UINT 0001h (Revision of the object)
Type
UINT 00A1h (Mitsubishi Electric)
UINT 0002h (AC Drive)
UINT 003Eh (Product code)
Structure Major revision and minor revision
USINT 0001h (Major revision number)
USINT 0001h (Minor revision number)
WORD Refer to "Status (Attribute 5)" on
UDINT Serial number of the inverter
SHORT_
FR-E800-E (Product name)
STRING
Structure Active language
USINT
USINT e, n, g (English)
USINT
Structure
List of languages supported by the host application
array
USINT
USINT e, n, g (English)
USINT
Description
Description
Description
page 104.