Battery Removal - Remington HC340 Manual

BATTERY REMOVAL

• The battery must be removed from the appliance before it is scrapped.
• The appliance must be disconnected from the supply mains when removing the
battery.
• Ensure the clipper is discharged of all power.
1. First remove the comb.
2. Open the hair pocket (Diagram H).
3. Unscrew 2 screws in the hair pocket with a screwdriver.
4. Unscrew the screw on the back housing of the clipper (Diagram I).
5. Lift or pry the clipper halves apart, exposing the battery.
6. Cut the wires on both ends of the battery and remove it from the clipper.
• Dispose of the batteries safely.
RECYCLING
W
8
To avoid environmental and health problems due to hazardous
substances, appliances and rechargeable and non-rechargeable
batteries marked with one of these symbols must not be disposed of
with unsorted municipal waste. Always dispose of electrical and
electronic products and, where applicable, rechargeable and
non-rechargeable batteries, at an appropriate official recycling/
collection point.