Beeper Definitions - Symbol SE955 Integration Manual

Beeper Definitions

The SE955 issues different beep sequences and patterns to indicate status.
normal scanning and while programming the scan engine.
Beeper Sequence
Standard Use
Low/medium/high beeps
Short high beeps
4 long low beeps
5 low beeps
Hi/hi/hi/lo beeps
Parameter Menu Scanning
Short high beeps
Lo/hi beeps
Hi/lo beeps
Hi/lo/hi/lo beeps
Low/hi/low/hi beeps
Table 1-5
Table 1-5. Beeper Definitions
Power up.
A bar code symbol was decoded (if decode beeper is enabled).
A transmission error was detected in a scanned symbol. The data is ignored. This occurs
if a unit is not properly configured. Check option setting.
Conversion or format error.
RS232 receive error.
Correct entry scanned or correct menu sequence performed.
Input error, incorrect bar code or "Cancel" scanned, wrong entry, incorrect bar code
programming sequence; remain in program mode.
Keyboard parameter selected. Enter value using bar code keypad.
Successful program exit with change in the parameter setting.
Out of host parameter storage space. Scan
defines beep sequences that occur during both
Indication
Set Default Parameter on page
Getting Started 1-7
8-7.